Products
Manufacturer
RFQ
NEWS
ContactIDT49FCT805PYG
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Circuits | 2 |
| Frequency (Max) | 80MHz |
| Family | FCT |
| Output Characteristics | 3-STATE |
| Input | LVTTL |
| Logic IC Type | LOW SKEW CLOCK DRIVER |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 5.6 ns |
| Propagation Delay (tpd) | 5.6 ns |
| Same Edge Skew-Max (tskwd) | 0.7 ns |
| Number of True Outputs | 5 |
| Height Seated (Max) | 1.99mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Published | 2009 |
| JESD-609 Code | e3 |
IDT49FCT805PYG Overview
There is a case available for the cut smart buffer in SSOP. Under normal circumstances, 80MHz is the maximum value. In it, there are 20 terminations. Using a supply voltage of 5V allows for high efficiency. It's in the way of Surface Mount. The clock buffer contains 20 pins. I have enclosed this circuit clock in Clock Drivers for your convenience. A minimum temperature of 0°C is required for reliability. In order to ensure stable operation, the maximum operating temperature must be set to 70°C. There is an electronic gadget called FCT in this family. A logic IC with a value of LOW SKEW CLOCK DRIVER is used for this application. The supply voltage (Vsup) should be maintained above 4.75V in order for the clock divider to operate normally. There is a 5V volt supply attached to it. A total of 5 outputs are available.
IDT49FCT805PYG Features
20 terminations
Clock Drivers subcategory
logic IC type of LOW SKEW CLOCK DRIVER
IDT49FCT805PYG Applications
There are a lot of Integrated Device Technology (IDT) IDT49FCT805PYG Clock Buffers & Drivers applications.
- Zero crossing detector
- Navigation equipment
- Data center
- Other clock/data distribution
- Mass storage system
- High speed industry
- Hardware accelerator
- Line receiver and signal recovery
- Dual core processor workstations and servers
- Aviation
