IDT23S05E-1DCG8

IDT23S05E-1DCG8 Overview

As a clock IC, it uses the Tape & Reel (TR) package. SOIC contains this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 8 terminations found in the file. This electronic frequency generator requires a voltage of 3.3V. LVTTL is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. An up to 200MHz frequency is provided by this clock-based RF synthesizer. The maximal supply voltage (Vsup) reaches 3.6V. It is safe to use this frequency synthesizer with a supply voltage above 3V. This clock-generating IC is a 8-bit device designed explicitly for microprocessors. Designed to operate at low temperatures, this frequency generator performs 0°C operations per second. The operating temperature should be lower than 70°C. This clock generator can be classified as a kind of Clock Drivers in general. At 0.25 ns Max, this clock generator offers low timing skew. Analog clock generator is configured with 4 pins that enable the high true output. A search for the 23S family will yield similar electronic components. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.

IDT23S05E-1DCG8 Features

Available in the SOIC
Supply voltage of 3.3V
4 true outputs

IDT23S05E-1DCG8 Applications

There are a lot of Integrated Device Technology (IDT) IDT23S05E-1DCG8 Clock Generators applications.

• Set-top boxes
• Simple clock clean-up circuits
• Automatic control system test
• Local oscillator source in receiver
• Clock recovery
• VSAT (Small Ground Satellite Station)
• Quenching?
• Frequency Modulation (FM) stereo decoders
• Clock signals to the high-speed Digital RF circuits
• Electronic countermeasures