IDT2308A-1HPGG8

IDT2308A-1HPGG8 Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the TSSOP package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. The clock generator ic should be grounded with a voltage of 3.3V. As the Clock PLL's input, LVTTL is designed to be used in order to generate the clock signal. There are 1 circuits implemented in order to achieve full performance from this electronic part. A clock-based RF synthesizer that provides a max frequency of 133.3MHz is available. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. This frequency synthesizer requires a supply voltage above 3V to be safe. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. Despite its low-temperature operation, this clock generator ic is capable of 0°C operations. The RF synthesizer can still operate at 70°C with attenuated performance. Clock generator can also be included into Clock Drivers. The timing skew of this frequency synthesizer is low at 0.2 nsmax. This digital clock generator is configured with 8 high true output enable pins. When searching for parts of the 2308 family, similar electronic components will be found. Logic circuits that use PLL BASED CLOCK DRIVER logic are composed of this analog clock generator.

IDT2308A-1HPGG8 Features

Available in the TSSOP
Supply voltage of 3.3V
8 true outputs

IDT2308A-1HPGG8 Applications

There are a lot of Integrated Device Technology (IDT) IDT2308A-1HPGG8 Clock Generators applications.

• Microprocessor clock multipliers
• Main oscillator in receiver
• Skew suppression
• FMCW Radar
• Cellular/4G
• Modems
• Radiotelephones
• Threshold extension
• Telecommunication systems
• Digital switching systems