IDT2305A-1HDCGI8

IDT2305A-1HDCGI8 Overview

A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the SOIC package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 8 terminations can be found in frequency synthesizer. To operate this time clock generator, 3.3V voltage should be applied. This Clock PLL will be fed by LVTTL as its input. To access the full performance of the electronic component, 1 circuits are implemented. Providing a maximum frequency of 133MHz, this clock-based RF synthesizer is suitable for a variety of applications. It would be possible to supply this clock PLL with 3.6V of power. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. In particular, this clock PLL is designed to be used with microprocessors. Designed to operate at low temperatures, this frequency generator performs -40°C operations per second. The operating temperature should be lower than 85°C. A Clock Drivers clock generator is essentially what this device is. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. There are 4 true outputs. The 2305 family of parts can be used to find electronic parts that are similar to each other. Electronic frequency generator is mainly used for constructing PLL BASED CLOCK DRIVER logic circuits.

IDT2305A-1HDCGI8 Features

Available in the SOIC
Supply voltage of 3.3V
4 true outputs

IDT2305A-1HDCGI8 Applications

There are a lot of Integrated Device Technology (IDT) IDT2305A-1HDCGI8 Clock Generators applications.

• Televisions
• Satellite receivers
• Clock signals to the high-speed Digital RF circuits
• Reference signals to RF systems
• Ultrasound diagnosis
• Motor speed controls
• Cable television converter boxes
• Frequency shifting decodes
• Symbol synchronization
• Carrier synchronization in wired communication