IDT2305-1HDCG

IDT2305-1HDCG Overview

This clock generator will sustain a maximum temperature of 260 when reflown. As a result of this, we can find 8 terminations. Clock generator ics require a voltage of 3.3V. It would take a maximum supply voltage of 3.6V to operate this time clock generator. The supply voltage for this frequency synthesizer should be kept above 3V for safety considerations. If the frequency generator's operating temperature exceeds 70°C, it may pose a ha70°Card. In particular, this clock PLL is designed to be used with microprocessors. There are a number of 8 pins that are available on the frequency synthesizers. As such, it is often referred to as a kind of Clock Drivers clock PLL. The maximal same edge skew (tskwd) can not be exceeded. A analog clock generator with 4 true output enable pins is configured for this application. You can find similar clock generators by searching for the 2305 family. Electronic frequency generator is mainly used for constructing PLL BASED CLOCK DRIVER logic circuits. STANDARD input conditioning makes control signals from physical input clock PLLs.

IDT2305-1HDCG Features

Supply voltage of 3.3V
4 true outputs

IDT2305-1HDCG Applications

There are a lot of Integrated Device Technology (IDT) IDT2305-1HDCG Clock Generators applications.

• Microprocessor clock multipliers
• Computers to manage memory cards
• Ultrasound diagnosis
• Automatic test equipment
• Smartphones
• GPS systems
• Local oscillator source in receiver
• Main oscillator in receiver
• Fiber Channel
• Local oscillators (LOs)