IDT2305-1DCGI8

IDT2305-1DCGI8 Overview

This clock IC is packaged using the Cut Tape (CT) method. As part of the SOIC package, this clock generator is embedded. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 8 terminations. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be LVTTL. For full access to the electronic component's capabilities, 1 circuits are implemented. An up to 133MHz frequency is provided by this clock-based RF synthesizer. The maximal supply voltage this clock generator would take is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. There is an available 8 pin on the PLL. The operating temperature should be higher than -40°C. This RF synthesizer can last with attenuated performance at 85°C. The clock PLL is generally classified as a Clock Drivers device. As a result of this digital clock generator, there is a low timing skew at 0.25 ns max. There are 4 pins configured for enabling high true outputs on this clock generator. By searching for the 2305 family, it is possible to find similar electrical components. Electronic frequency generator is mainly used for constructing PLL BASED CLOCK DRIVER logic circuits.

IDT2305-1DCGI8 Features

Available in the SOIC
Supply voltage of 3.3V
4 true outputs

IDT2305-1DCGI8 Applications

There are a lot of Integrated Device Technology (IDT) IDT2305-1DCGI8 Clock Generators applications.

• Set-top boxes
• Microprocessor clock multipliers
• Small signal recovery
• Deep space exploration
• Skew suppression
• Frequency synthesis
• Frequency synthesis
• Mobile telephones
• Bit synchronization
• Digital switching systems