ICS574MLFT

ICS574MLFT Overview

The Digi-Reel? method is used for packaging clock ICs. The SOIC package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. 8 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be CMOS. It is possible to access the full performance of the electrical part by implementing 1 circuits. An upper frequency limit of 160MHz Max can be achieved with this clock-based frequency synthesizer. It would be possible to supply this clock PLL with 5.5V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. PF synthesizers is equipped with 8 pins. Electronic frequency generator can operate at low temperatures and can perform 0°C operations at a time. This RF synthesizer can last with attenuated performance at 70°C. Clock Drivers-type frequency generators are usually classified as this type. There are 4 true outputs. The 574 family of parts can be used to find electronic parts that are similar to each other. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator.

ICS574MLFT Features

Available in the SOIC
Supply voltage of 3.3V
4 true outputs

ICS574MLFT Applications

There are a lot of Integrated Device Technology (IDT) ICS574MLFT Clock Generators applications.

• FM demodulation networks for FM operations
• Reference signals to RF systems
• HDD recorders
• Signal frequency synthesis circuits
• GPS systems
• Microwave radio
• Camera systems
• Pagers
• Coherent detection of the signal
• Simple clock clean-up circuits