Products
Manufacturer
RFQ
NEWS
ContactICS552R-01LNT
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 200MHz |
| Input | Clock |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
ICS552R-01LNT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. SSOP contains this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 20 terminations. This clock generator ic should receive a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 200MHz. Approximately 5.5V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency generator's supply voltage should remain above 3V. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. A frequency generator with 0°C operations has an impressive low-temperature performance. The RF synthesizer can still operate at 70°C with attenuated performance.
ICS552R-01LNT Features
Available in the SSOP
Supply voltage of 3.3V
ICS552R-01LNT Applications
There are a lot of Integrated Device Technology (IDT) ICS552R-01LNT Clock Generators applications.
- 1 Gigabit Ethernet
- Wide area power system
- FM demodulation networks for FM operations
- Precision auxiliary angle deflection measurement
- Signal generator
- Camera systems
- FPGA and processor clocks
- Modems
- Vector network analyzers (VNA)
- Broadcast communication
