HPA00126DGGR

HPA00126DGGR Overview

Tape & Reel (TR)-method packaging is used for clock ICs. The TSSOP package contains this clock generator. As a result, frequency synthesizers can be found to contain 48 terminations. For this clock generator ic, a voltage of 2.5V is required. 2.7V would be the maximum supply voltage for this clock generator. The supply voltage for this frequency synthesizer should be kept above 2.3V for safety considerations. HPA00126 is the base part number for finding related electronic parts. It is possible to connect to the PLL via 48 pins. Despite its low operating temperature, this clock generator has -40°C operations. The operating temperature should be lower than 85°C. The output frequency is magnified as high as possible with 10 signal outputs. As a result of this digital clock generator, there is a low timing skew at 0.04 ns max. This clock generator belongs to the family of CDCV. A PLL BASED CLOCK DRIVER logic circuit uses this time clock generator as its main component. By conditioning input signals from physical frequency generators, DIFFERENTIAL MUX input conditioning can produce control signals.

HPA00126DGGR Features

Available in the TSSOP
Supply voltage of 2.5V

HPA00126DGGR Applications

There are a lot of Texas Instruments HPA00126DGGR Clock Generators applications.

• Bit synchronization
• Cellular/4G
• Signal modulation and demodulation
• Frequency shifting decodes
• Notebooks
• Antenna automatic tracking
• Radar
• Remote telemetry and instrumentation
• Automatic control
• Microwave backhaul IF