Products
Manufacturer
RFQ
NEWS
ContactHI1-0303-2
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 14 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | LG-MAX |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Operating Supply Voltage | 28V |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 34V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 90nA |
| Nominal Supply Current | 90μA |
| Max Supply Current | 500μA |
| Number of Bits | 2 |
| Throw Configuration | SPDT |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 18V |
| Off-state Isolation-Nom | 60 dB |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 35Ohm |
| Height Seated (Max) | 5.08mm |
| Length | 19.94mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
HI1-0303-2 Overview
Shipping overseas is convenient due to the electrical component's packing in CDIP. To ensure high reliability, a new packaging method Bulk is used. The total number of terminations is 14. The electronic part delivers high-quality output through its 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. The electronic part body is injected with 14 pins. Internally, this switch multiplexer has a resistance of 50Ohm. For functions related to 14 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. normally, users should not supply switches with voltages higher than 34V. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 5V should be applied to the electronic component. For this digital switch to work, 90nA current would suffice. A digital multiplexer may suffer damage if voltage is applied above 500μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIn the case of dual power supplies, you should connect at least 5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. 28V operating voltages are supported by the electronic component. Additional features include: LG-MAX. Temperatures above 125°C degrees Celsius should not be operated by the multiplexer. It has a Drain to Source resistance of 35Ohm ohms. Its conductivity is 2-bit.
HI1-0303-2 Features
1 Channels
90nA Supply Current
Additional Features: LG-MAX
Drain-to-Source resistance: 35Ohm
2-Bit
HI1-0303-2 Applications
There are a lot of Intersil (Renesas Electronics America) HI1-0303-2 Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Cable Modem
- Sample hold systems
- Power routing
- Signal routing between systems
- Cell phones
- Isolation
- Precision data acquisition
- Communications systems
- PCMCIA cards
