Products
Manufacturer
RFQ
NEWS
ContactHCF4053BEY
SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE HCF4053 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)
- Manufacturer: STMicroelectronics
- NO: 761-HCF4053BEY
- Package: 16-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 9988
- Description: SPDT 280Ohm Analog Switches BREAK-BEFORE-MAKE HCF4053 16 Pins 100nA 5V 16-DIP (0.300, 7.62mm)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.05kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 200mW |
| Technology | MOS |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | HCF4053 |
| Pin Count | 16 |
| Polarity | Non-Inverting |
| Power Supplies | 5/15V |
| Number of Channels | 2 |
| Number of Circuits | 3 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 80nA |
| Power Dissipation | 500mW |
| Propagation Delay | 60 ns |
| Quiescent Current | 80nA |
| Turn On Delay Time | 720 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 6 |
| Supply Type | Dual |
| Bandwidth | 60MHz |
| Turn-Off Delay Time | 450 ns |
| On-State Resistance (Max) | 280Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 5pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Circuit | SPDT |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -40dB @ 6MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~20V |
| Signal Current-Max | 0.01A |
| Height | -510μm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
HCF4053BEY Overview
Shipping overseas is convenient due to the electrical component's packing in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 2 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electronic part can be found in the 16 series. A SPDT switching circuit is used for these analog switches. 3 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with HCF4053. A 1.05kOhm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 20V in normal situations. Analogue multiplexers of the Dual supply type that are cost-effective. There should be 3V voltage fed to the electrical part below 3V. An operating current of 80nA would be sufficient for this switch device. Analogue multiplexers require a 3V~20V voltage to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The 6 inputs need to be operated in order to work. In 60MHz-bandwidths, data can be transferred.
HCF4053BEY Features
2 Channels
Switch Circuit: SPDT
80nA Supply Current
Bandwidth: 60MHz
HCF4053BEY Applications
There are a lot of STMicroelectronics HCF4053BEY Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Frame Relay Equipment
- PBX interfaces
- Cable PC
- DSUs
- Fiber to the Home
- Cable Modem
- Microprocessor controlled systems
- Battery Powered Systems
- Precision instrumentation
