Products
Manufacturer
RFQ
NEWS
ContactFSA1256L8X
35ns, 15ns SPST - NO 1.15Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE FSA1256 2nA Typ 2.7V 8-UFQFN
- Manufacturer: ON Semiconductor
- NO: 598-FSA1256L8X
- Package: 8-UFQFN
- Datasheet:
- Stock: 8742
- Description: 35ns, 15ns SPST - NO 1.15Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE FSA1256 2nA Typ 2.7V 8-UFQFN(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 180mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | FSA1256 |
| Output | SEPARATE OUTPUT |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 180mW |
| Max Supply Current | 500nA |
| Throw Configuration | SPDT |
| Turn On Delay Time | 50 ns |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 20 ns |
| On-State Resistance (Max) | 1.15Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 70 dB |
| Current - Leakage (IS(off)) (Max) | 2nA Typ |
| Channel Capacitance (CS(off), CD(off)) | 11.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 35ns, 15ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 60ns |
| Switch-off Time-Max | 30ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Drain to Source Resistance | 9.5Ohm |
| Normal Position | NO |
| Height | 500μm |
| Length | 1.6mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Number of Pins | 8 |
| Weight | 25mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 1.15Ohm |
FSA1256L8X Overview
Shipping overseas is convenient due to the electrical component's packing in 8-UFQFN. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. In total, there are 8 terminations. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 2.7V, it should be turned on and run. Circuits based on SPST - NO switching are used to construct these analog switch ics. FSA1256 can be used to search for analog multiplexer variants. As far as internal resistance is concerned, it has 1.15Ohm. The datasheets for the 8 pins explain the functions. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 500nA. This analog switch ic utilizes SEPARATE OUTPUT output. 300MHz-bandwidths can be used to transfer data between multiplexers. Resistivity from Drain to Source is 9.5Ohm for this electronic part.
FSA1256L8X Features
2 Channels
Switch Circuit: SPST - NO
Bandwidth: 300MHz
Drain-to-Source resistance: 9.5Ohm
FSA1256L8X Applications
There are a lot of ON Semiconductor FSA1256L8X Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- PCMCIA cards
- Central office
- Relay replacements
- High reliability control systems
- Battery-powered systems
- Microprocessor controlled systems
- PBX interfaces
- ATM
- Precision test equipment
