EPM7256SQC208-7N

EPM7256SQC208-7N Overview

There are 256 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the PQFPpackage, you will find it.There are 164 I/Os on the board.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 5V volts.This part is included in Programmable Logic Devices.Chips are programmed with 208 pins.In digital circuits, there are 5000gates, which act as a basic building block.If high efficiency is desired, the supply voltage should be kept at [0].Data is stored using [0].It is mounted by Surface Mount.A total of 208pins are provided on this board.A maximum voltage of 5.25Vis required for operation.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.There are 164 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 166.7MHzcan be achieved.In order to operate, the temperature should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.In its simplest form, it consists of 16 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.Types of programmable logic are divided into EE PLD.

EPM7256SQC208-7N Features

PQFP package
164 I/Os
208 pin count
208 pins
16 logic blocks (LABs)

EPM7256SQC208-7N Applications

There are a lot of Altera EPM7256SQC208-7N CPLDs applications.

• ROM patching
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• PULSE WIDTH MODULATION (PWM)
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Programmable power management
• I/O PORTS (MCU MODULE)
• DDC INTERFACE
• Cross-Matrix Switch
• Custom shift registers
• State machine design