EPM7160ELC84-15

EPM7160ELC84-15 Overview

160 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the PLCCpackage, you will find it.It is programmed with 64 I/Os.It is programmed that device terminations will be 84 .This electrical part is wired with a terminal position of QUAD.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.The chip is programmed with 84 pins.It is also characterized by CONFIGURABLE I/O OPERATION WITH 3.3V OR 5V.In digital circuits, there are 3200gates, which act as a basic building block.High efficiency requires a voltage supply of [0].Data is stored using [0].In this case, it is mounted by Surface Mount.A total of 84pins are provided on this board.With a maximum supply voltage of [0], it operates.Despite its minimal supply voltage of [0], it is capable of operating.Currently, there are 64 Programmable I/Os available.There can be 100MHz frequency achieved.It is recommended that the operating temperature exceed 0°C.There should be a temperature below 70°Cat the time of operation.In total, it contains 10 logic blocks (LABs).It is recommended that the maximal frequency be lower than 100MHz.A programmable logic type can be categorized as EE PLD.

EPM7160ELC84-15 Features

PLCC package
64 I/Os
84 pin count
84 pins
10 logic blocks (LABs)

EPM7160ELC84-15 Applications

There are a lot of Altera EPM7160ELC84-15 CPLDs applications.

• ROM patching
• LED Lighting systems
• Dedicated input registers
• I/O expansion
• Reset swapping
• Address decoding
• High speed graphics processing
• Timing control
• Digital designs
• State machine control