EPM570GT144C3N

EPM570GT144C3N Overview

440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.There is a TQFP package containing it.As a result, it has 116 I/O ports programmed.It is programmed to terminate devices at [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 1.8V is used to power it.It belongs to the family [0].It is recommended that the chip be packaged by Bulk.With 144pins programmed, the chip is ready to use.For high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].The electronic component is mounted by Surface Mount.The pins are [0].It operates with the maximal supply voltage of 1.89V.Normally, it operates with a voltage of 1.71VV as its minimum supply voltage.There are 116 Programmable I/Os.This can be achieved at a frequency of 304MHz.The operating temperature should be higher than 0°C.Temperatures should be lower than 85°C when operating.57logic blocks (LABs) make up this circuit.As a fundamental building block, there are 570 logic elements/cells.It is recommended that the maximum frequency be less than 304MHz.Devices include a memory of 1kBavailable for the storage of programs and data.

EPM570GT144C3N Features

TQFP package
116 I/Os
144 pin count
144 pins
57 logic blocks (LABs)

EPM570GT144C3N Applications

There are a lot of Altera EPM570GT144C3N CPLDs applications.

• Interface bridging
• Discrete logic functions
• Parity generators
• Custom state machines
• Dedicated input registers
• Bootloaders for FPGAs
• Reset swapping
• White goods (Washing, Cold, Aircon ,...)
• PLC analog input modules
• Configurable Addressing of I/O Boards