EPM570GF256C3N

EPM570GF256C3N Overview

440 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a FBGA package.The device is programmed with 160 I/Os.The device is programmed with 256 terminations.This electrical part is wired with a terminal position of BOTTOM.The device is powered by a voltage of 1.8V volts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Bulk.There are 256 pins on the chip.This device can also display [0].For high efficiency, the supply voltage should be maintained at [0].FLASH is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.A total of 256pins are provided on this board.In this case, the maximum supply voltage is 1.89V.With a minimal supply voltage of [0], it operates.Programmable I/Os are counted up 160.This can be achieved at a frequency of 3.01205GHz.In order to operate properly, the operating temperature should be higher than 0°C.A temperature lower than 85°Cis recommended for operation.It is composed of 57 logic blocks (LABs).As a fundamental building block, there are 570 logic elements/cells.If the maximal frequency is less than [0], it should be lower than that.It is possible to store data and programs in the devices' 1kBmemory.

EPM570GF256C3N Features

FBGA package
160 I/Os
256 pin count
256 pins
57 logic blocks (LABs)

EPM570GF256C3N Applications

There are a lot of Altera EPM570GF256C3N CPLDs applications.

• I/O expansion
• Reset swapping
• PLC analog input modules
• Voltage level translation
• Preset swapping
• D/T registers and latches
• ON-CHIP OSCILLATOR CIRCUIT
• Multiple DIP Switch Replacement
• Power up sequencing
• Timing control