EPM1270GT144C3

EPM1270GT144C3 Overview

980 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The product is contained in a TQFP package.The device has 116inputs and outputs.Terminations of devices are set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 1.8V voltage supply for this device.It is a part of the family [0].It is recommended that the chip be packaged by Bulk.It is equipped with 144 pin count.If you use this device, you will also find [0].The supply voltage should be maintained at 1.8V for high efficiency.It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.There are 144pins on it.A maximum voltage of 1.89Vis required for operation.The minimal supply voltage is 1.71V.Programmable I/Os are counted up 116.In this case, 3.01205GHzis the frequency that can be achieved.Operating temperatures should be higher than 0°C.There should be a temperature below 85°Cat the time of operation.Its basic building block is composed of 127 logic blocks (LABs).Fundamental building blocks consist of 1270logic elements/cells.There should be a lower maximum frequency than 304MHz.Using the devices' 1kBmemory, programs and data can be stored.

EPM1270GT144C3 Features

TQFP package
116 I/Os
144 pin count
144 pins
127 logic blocks (LABs)

EPM1270GT144C3 Applications

There are a lot of Altera EPM1270GT144C3 CPLDs applications.

• Random logic replacement
• Preset swapping
• Digital systems
• Wide Vin Industrial low power SMPS
• Digital designs
• SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
• DDC INTERFACE
• Dedicated input registers
• Field programmable gate
• State machine design