EPM1270F256I5N

EPM1270F256I5N Overview

There are 980 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).You can find it in package [0].The device is programmed with 212 I/Os.There are 256 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.BOTTOMis the terminal position of this electrical part.It is powered by a voltage of 2.5V volts.It is a part of the family [0].In this chip, the 256pins are programmed.When using this device, IT CAN ALSO OPERATE AT 3.3Vis also available.A high level of efficiency can be achieved by maintaining the supply voltage at [0].FLASH is adopted for storing data.Surface Mountis used to mount this electronic component.The pins are [0].A maximum voltage of 3.6Vis required for operation.Normally, it operates with a voltage of 2.375VV as its minimum supply voltage.This frequency can be achieved at 304MHz.It is recommended that the operating temperature be higher than -40°C.There should be a temperature below 100°Cat the time of operation.There are 127logic blocks (LABs) that make up its basic building block.Fundamental building blocks consist of 1270logic elements/cells.There should be a lower maximum frequency than 304MHz.In the devices, a memory of 1kBis provided for the storage of programs and data.

EPM1270F256I5N Features

FBGA package
212 I/Os
256 pin count
256 pins
127 logic blocks (LABs)

EPM1270F256I5N Applications

There are a lot of Altera EPM1270F256I5N CPLDs applications.

• SUPERVISORY FUNCTION (LVD AND WATCHDOG)
• Auxiliary Power Supply Isolated and Non-isolated
• High speed graphics processing
• Code converters
• ANALOG-TO-DIGITAL CONVERTOR (ADC)
• Custom state machines
• PLC analog input modules
• Portable digital devices
• Configurable Addressing of I/O Boards
• Pattern recognition