E2E2-X5B1-M1

E2E2-X5B1-M1 Overview

This is included in the Cylinder, Threaded - M18 package to make it easier for you to use. Operating temperatures of -40°C~85°C can be suitable for proximity sensors. This electronic component has 3 pins. It is possible to reach the lowest operating temperature of the proximity sensors at -40°C. It is not possible for proximity sensors to operate above 85°C. If the rate is 600Hz, then the proximity sensors will function. If the proximity sensors are to function properly, the current passing through the reed switch's internal contacts should be 200mA. The maximum voltage of 55V can be applied to the proximity sensors without damage in DC circuit. The current drawn by the proximity sensors in the DC circuit should not be less than 10V, otherwise it will be dangerous. For maximum efficiency, you should set the current of this electronic component to 13mA.

E2E2-X5B1-M1 Features

E2E Series
Operating Temperature: -40°C~85°C
Sensing Distance: 0.197 (5mm)
Voltage - Supply: 10V~55V
Response Frequency: 600Hz
Package / Case: Cylinder, Threaded - M18
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 13mA

E2E2-X5B1-M1 Applications

There are a lot of Omron Automation and Safety E2E2-X5B1-M1 Proximity Sensors applications.

• Usage in Security
• Counter System
• Contact less switching
• Assembly lines
• Automation
• PC monitors
• Non-ferrous objects detection
• Collision detection on robots
• Rice cookers
• Mobile Phones