E2A-M18KN16-M1-C1

E2A-M18KN16-M1-C1 Overview

I've included it in the Cylinder, Threaded - M18 package for your convenience. It is possible to operate proximity sensors successfully at a temperature of -40°C~70°C. There are 4 pins on this electronic component. To maximize efficiency, proximity sensors should have their supply voltage set to 24V. -40°C is the lowest operating temperature of the proximity sensors. In order to operate, proximity sensors must have an operating temperature below 70°C. In order to ensure the proximity sensors work correctly, the rate must be set to 400Hz. Reed switches' internal contacts should pass 200mA current to make proximity sensors work. There is a maximum voltage of 32V that can be applied to proximity sensors in DC circuits without causing damage. The current of the proximity sensors in the DC circuit should not be lower than 10V, otherwise, it will be dangerous. You should set the current of this electronic part to 10mA in order to maximize efficiency.

E2A-M18KN16-M1-C1 Features

E2A Series
Operating Temperature: -40°C~70°C
Sensing Distance: 0.630 (16mm)
Voltage - Supply: 10V~32V
Response Frequency: 400Hz
Package / Case: Cylinder, Threaded - M18
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Supply Current: 10mA

E2A-M18KN16-M1-C1 Applications

There are a lot of Omron Automation and Safety E2A-M18KN16-M1-C1 Proximity Sensors applications.

• Notebooks
• Tablets
• Display products
• PC monitors
• Air-conditioners
• Anti-aircraft systems
• Parking
• Smart toilets
• Rolling mills
• Detect position