DS4311D+

DS4311D+ Overview

A frequency of 311.04MHz has been set for the programmable timer.It is used to pack in Tray case. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 52mA voltage. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The types of oscillator includes LVDS. The timer clock contains 10 pins. The digital timer's operating supply voltage is rated 3.3V voltage. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: TRI-STATE; ENABLE/DISABLE FUNCTION. On operating frequency, it's available in the range of 311.04MHz. The digital timer has a frequency tolerance value of 0.005%. The number of the chip's terminations sums up to 10. Its subcategory belongs to Other Oscillators. The minimum supply voltage of the chip must not be lower than 3.135V. The supply voltage of this chip should not exceed 3.465V.

DS4311D+ Features

Operate frequency at 311.04MHz
Package / Case: Tray
Max Operating temperature at -40°C
Additional Feature: TRI-STATE; ENABLE/DISABLE FUNCTION

DS4311D+ Applications

There are a lot of Maxim Integrated DS4311D+ Programmable Timers & Oscillators applications.

• Energy Harvesting Systems
• Periodic “Wake-Up” Call
• Motor control
• Long Time One Shot
• Intruder Detection
• Battery Powered Systems
• Smart Key
• Power-Gating Applications
• Remote Sensors
• Internet of Things (IoT)