DS21602SN

DS21602SN Overview

As a clock IC, it uses the Tube package. Clock PLL is embedded in the 16-SOIC (0.295, 7.50mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains 16 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. A clock generator's input is called Clock and it is designed as the input for this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 8.192MHz. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There are 3.135V~5.25V different supply voltages that can be provided for this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component can be classified as a Clock Rate Adapter. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number DS21602. There is an available 16 pin on the PLL. There is a maximum supply voltage of 5V that this analog clock generator can handle. This frequency synthesizer features ALSO OPERATES AT 5V SUPPLY to produce better clock signals. A analog clock generator with 2 true output enable pins is configured for this application. This time clock generator requires a supply current of 14mA in order to operate properly.

DS21602SN Features

Available in the 16-SOIC (0.295, 7.50mm Width)
Supply voltage of 3.3V
Operating supply voltage of 5V
2 true outputs

DS21602SN Applications

There are a lot of Maxim Integrated DS21602SN Clock Generators applications.

• Local oscillator source in receiver
• High-speed communication applications
• Reference signals to RF systems
• Microprocessor clock multipliers
• Test and instrumentation equipment
• Small signal recovery
• Local oscillators (LOs)
• High-speed optical transport network (OTN)
• Mechanical devices
• Remote telemetry and instrumentation