Products
Manufacturer
RFQ
NEWS
ContactDS1809-010
8 Terminations5V 8 Pin Digital PotentiometersDallastat? Series Pushbutton
- Manufacturer: Rochester Electronics
- NO: 699-DS1809-010
- Package: 8-DIP (0.300, 7.62mm)
- Datasheet:
- Stock: 7500
- Description: 8 Terminations5V 8 Pin Digital PotentiometersDallastat? Series Pushbutton(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | COMMERCIAL |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Configuration | Potentiometer |
| Interface | Pushbutton |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Memory Type | Non-Volatile |
| Taper | Linear |
| Number of Taps | 64 |
| Resistance - Wiper (Ω) (Typ) | 400 Max |
| Temperature Coefficient (Typ) | 750ppm/°C |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | Dallastat™ |
| Tolerance | ±20% |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 10kOhm |
| Terminal Finish | TIN LEAD |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
DS1809-010 Overview
It is contained in 8-DIP (0.300, 7.62mm) pacakge.This pentometer begins to be stored by Non-Volatile.This digital potentiometer contains 1 embedded circuits.Tube package provides access to it.For this pentometer, there are 64 taps that protect against overcurrent.The terminations are 8.Listed below are 1 functions included in this programmable potentiometer.In order for it to perform, it relies on 5V.8 pins can be seen in The digi devices.It is recommended to mount in the way of Through Hole.The potentionmeter can supply 5V voltage.With this digital potentiometer, the temperature range is -40°C~85°C.A flow rate limit of 10kOhm is possible.There are also a number of additional analog IC types, as follows: ANALOG CIRCUIT5.5V is the maximum supply voltage (Vsup).A voltage greater than 4.5V must be the minimum supply voltage (Vsup).
DS1809-010 Features
Available in 8-DIP (0.300, 7.62mm) package
1 Circuits
Mounting Type: Through Hole
Operate temperature at the range of -40°C~85°C
Analog IC type: ANALOG CIRCUIT
DS1809-010 Applications
There are a lot of Rochester Electronics, LLC DS1809-010 Digital Potentiometers applications.
- Automatic gain control
- Automotive electronics
- Contrast control of monitors
- Industrial control
- Automated caliberation
- LEDs
- Speakers
- Matching Linear Impedance
- Sensor trimming instrumentation
- DC/DC conversion circuit
