DS17285E-3

DS17285E-3 Overview

real time clocks is located in package 28-TSSOP (0.465, 11.80mm Width).Tray is the way time clock is packaged, which is the way time clock is intended to be.To supply this electrical RTC, a voltage of 2.7V~3.7V is required.There is a type Clock/Calendar for this electrical real time clock.As you can see from the diagram, this electronic component is mounted in the way of Surface Mount.In order to operate properly, the temperature should be 0°C~70°C.During operation, Alarm, Daylight Savings, Leap Year, NVSRAM, Square Wave Output can be guaranteed.There are 28 terminations, which are the practice of ending a transmission line welectronic time clocksh a RTC module that matches the characteristic impedance of the line.There is 3V voltage supplied to this RTC real time clock.It has a total of 28 pins on it.RTCs are a member of the family DS17285.2.5V~3.7V is the supply voltage of this electrical digital time clock.A component such as this is included in the contents of Timer or RTC.A memory of 2KB is embedded in the RTC times, which can be used to store programs and data.The frequency of real time clocks' output should not exceed 0.032MHz.The power supply is 3V.There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received.

DS17285E-3 Features

28-TSSOP (0.465, 11.80mm Width) package
28 terminations
28 pin count
3V power supplies

DS17285E-3 Applications

There are a lot of Maxim Integrated DS17285E-3 Real Time Clocks applications.

• Point-of-Sale Equipment
• Data loggers
• Embedded Systems
• Portable instruments
• Embedded Time Stamping
• High duration timers
• Copier
• Modem
• Mobile equipment
• Digital cameras