DS1393U-18+

DS1393U-18+ Overview

In the UMAX package, real time clocks is embedded as a dependency.The package is Tube.When transmission lines are terminated with a zero, their characteristic impedance is that of the terminating RTC module.This RTC real time clock has a voltage of 1.8V.The RTCs are equipped with the necessary features due to its 10 pins.It is included as part of Timers or RTCs.A maximum output frequency of 0.032MHz should be maintained by the real time analog clock.This RTC module is mounted using type Surface Mount.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications real time clock. There are 1 timers, which are control real time clocks that output a signal at a preset time after an input signal is received.Maintaining the supply voltage at 1.8V is the key to high efficiency.RTC time is recommended that the operating temperature be above -40°C.The operating temperature should be lower than 85°C.There is minimum supply voltage of 1.71V required for real time clocks to operate.The maximum voltage for the supply is 1.89V.

DS1393U-18+ Features

UMAX package
10 terminations
10 pin count
Be maintained at 1.8V for high efficiency.

DS1393U-18+ Applications

There are a lot of Maxim Integrated DS1393U-18+ Real Time Clocks applications.

• Fax/Printer
• Embedded Time Stamping
• Embedded Time Stamping
• Accurate high duration timer
• Telecommunications
• Printers and copiers
• Medical Devices
• GPS/Telematics Devices
• Portable Instruments
• Electronic metering