DS1390U-33+T&R

DS1390U-33+T&R Overview

There is an embedded version of real time clocks in the package 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).As you can see, time clock is packaged as if time clock were in the form of Tape & Reel (TR).This electrical RTC has a supply voltage of 2.97V~5.5V.This electrical real time clock has the type Clock/Calendar.On the system board, this real time clock (RTC) is mounted in Surface Mount.Ideally, the operating temperature should be set to -40°C~85°C.During the course of operation, Alarm, Leap Year, Square Wave Output, Trickle-Charger can be ensured.The DS1390 family contains RTCs .In this electrical digital time clock, the supply voltage is 1.3V~5.5V.There is a type of mounting for this RTC module: Surface Mount.It is equipped with 10 pins.RTC time is essential that the supply voltage remain at 3.3V for maximum efficiency.Ideally, the operating temperature should be higher than -40°C.A temperature lower than 85°C should be used for operating.Real time clocks operate with the minimal supply voltage of 2.97V.Real time clocks are powered by a voltage of 5.5V, which is its maximum supply voltage.

DS1390U-33+T&R Features

10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
Be maintained at 3.3V for high efficiency.

DS1390U-33+T&R Applications

There are a lot of Maxim Integrated DS1390U-33+T&R Real Time Clocks applications.

• Portable Instruments
• Glucometer
• Telecommunications
• Network Hubs
• Medicine Dispenser
• High duration timers
• Printers and copiers
• GPS/Telematics Devices
• Low standby power applications
• Portable instruments