DS1110E-75+

DS1110E-75+ Overview

For cost-effectiveness, it is packaged using Tube. In applications requiring insulating hardware, the TSSOP package is able to eliminate the need for this. DUAL is the location of the terminals. As part of its unique configuration, it is equipped with 14 terminations. When operating, 5V receives a supply voltage. As a logic type, it uses SILICON DELAY LINE. This technology was developed as a result of the advanced CMOS technology. There are all the benefits associated with Delay Lines subcategory. It is mounted in the way of Surface Mount. The power supplies of 5V is provided to ensure flexible operation. In its design, 14 pins are used. In certain applications, it is operated with a supply voltage of 5V. It is recommended to keep the maximum operating temperature at 85°C in order to ensure optimum performance. In order to maintain optimal performance, it is recommended that the operating temperature be kept at -40°C. A maximum supply voltage of 5.25V is supported. There is a minimum supply voltage of 4.75V supported by this device.

DS1110E-75+ Features

Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
With 5V I/O
Clock Frequency: 4.75V

DS1110E-75+ Applications

There are a lot of Maxim Integrated DS1110E-75+ Delay Lines Timing ICs applications.

• Network Hubs, Bridges, and Routers
• High Vibration, High Acceleration Environments
• Clock Synchronization
• Utility Meters
• Telecommunications
• Transponder design
• RF ATE applications
• Signal Generators and Analyzers
• Switch Debouncing
• Digital Video Projection