DS1091LUA-033+T

DS1091LUA-033+T Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As a result, frequency synthesizers can be found to contain 8 terminations. The clock generator ic should be grounded with a voltage of 3.3V. Clock is designed as this clock generator's input. To access the electronic component's full performance, 1 circuits are implemented. There is a maximum frequency of 33.3MHz Max with this clock-based frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. As long as you provide 3V~3.6V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be -40°C~125°C. With this clock-generator, you can generate a high-quality clock output frequency of 33.3MHz. As far as electrical parts go, this component can be classified as a Spread Spectrum Clock Generator component. Clock PLL is equipped with 8 pin count. These related electrical parts are available for the base part number DS1091L. There are 8 pins that are available on the clock PLL. RF synthesizers can handle voltages up to 3.3V. An electronic part belonging to the EconOscillator? series is being used here. For the clock time generator to function properly, 16mA of supply current must be provided.

DS1091LUA-033+T Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Output clock frequency (Max) of 33.3MHz
Operating supply voltage of 3.3V

DS1091LUA-033+T Applications

There are a lot of Maxim Integrated DS1091LUA-033+T Clock Generators applications.

• Satellite navigation communication
• PCI express cards
• VSAT (Small Ground Satellite Station)
• Main oscillator in receiver
• Simple clock clean-up circuits
• Media broadcast servers
• Antenna automatic tracking
• Laptops
• Digital logic circuits
• Radar