DS1013M-20

DS1013M-20 Overview

For cost-effectiveness, it is packaged using Tube. By utilizing the 8-DIP (0.300, 7.62mm) package, applications do not require additional insulating hardware. In order to ensure reliable performance, 4.75V~5.25V is supplied with a voltage. The technique of Through Hole is employed as its mounting type. In addition, it is equipped with 0°C~70°C operating temperature. The device has been configured with 1 taps and steps. The use of related parts with the same base part number DS1013 is universally preferred for a wide range of applications. There are two terminals at DUAL. For a unique configuration, it is equipped with 8 terminations. When the device is operating, the supply voltage of 5V is provided. It uses the logic type SILICON DELAY LINE. This technology was developed as a result of the advanced CMOS technology. It can be operated with a supply voltage of 4.75V as a minimum. With a maximum supply voltage of 5.25V, it is acceptable to operate it. It is mounted in the way of Through Hole. This is one of the key active components of the CMOS family of compounds. As a result of its BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT combined with other specific characteristics, it is well suited to a wide variety of applications.

DS1013M-20 Features

Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
stay resistance at CMOS

DS1013M-20 Applications

There are a lot of Maxim Integrated DS1013M-20 Delay Lines Timing ICs applications.

• Serial data transmissions up to 32 Gbps
• Transponder design
• Delay Matching
• Signal Generators and Analyzers
• Synchronization of clock and data
• RF ATE applications
• Digital Test Equipment
• Broadband test and measurement
• Security Systems
• Aperture Centering