Products
Manufacturer
RFQ
NEWS
ContactDG445DY-T1
250ns, 210ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 16-SOIC (0.154, 3.90mm Width)
- Manufacturer: Vishay Siliconix
- NO: 880-DG445DY-T1
- Package: 16-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 7478
- Description: 250ns, 210ns SPST - NO 85Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 16-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 85Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 640mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 512/+-15V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Power Dissipation | 640mW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 250 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 210 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 20V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 210ns |
| Charge Injection | -1pC |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| RoHS Status | Non-RoHS Compliant |
DG445DY-T1 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around -40°C~85°C TA. There are 16 terminations totally. As part of the design of the 16 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used to build these analog multiplexers. Analog switches have 85Ohm internal resistance. Please refer to the datasheets for 16 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 13V voltage fed to the electrical part below 13V. The switch device would be able to operate with 30mA current. Putting voltage greater than 1μA on the multiplexer may cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. A dual power supply should have at least 7V voltage attached. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. In order to operate the 4 inputs, there are several steps to follow.
DG445DY-T1 Features
Switch Circuit: SPST - NO
30mA Supply Current
DG445DY-T1 Applications
There are a lot of Vishay Siliconix DG445DY-T1 Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Routers
- Battery Powered Instruments
- Avionics
- CSU
- Fault Tolerant Systems
- Relay Replacement
- Digital access cross connects
- Imaging
- Automatic test equipment
