Products
Manufacturer
RFQ
NEWS
ContactDG417AK
175ns, 145ns SPST - NC 35Ohm Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 8-SOIC (0.154, 3.90mm Width)
- Manufacturer: Vishay Siliconix
- NO: 880-DG417AK
- Package: 8-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 7639
- Description: 175ns, 145ns SPST - NC 35Ohm Analog Switches BREAK-BEFORE-MAKE 8 Pins 250pA 8-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 35Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 175 ns |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 7V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 60pC |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 35Ohm |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 10.16mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DG417AK Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Operational temperature extended around -55°C~125°C TA. Total terminations are 8. As part of its design, the 8 series is equipped with this electronic component. The analog switch ics are built using SPST - NC switching circuits. There are 1 circuits in this multiplexer. Analog switches have 35Ohm internal resistance. The functions of 8 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 13V. When the digital multiplexer is charged above 1μA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. In the case of dual power supplies, you should connect at least 7V. There is 35Ohm resistance between Drain and Source for this electronic part.
DG417AK Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 35Ohm
DG417AK Applications
There are a lot of Vishay Siliconix DG417AK Analog Switches & Multiplexers ICs applications.
- Data Acquisition Systems
- USB 1.1 signal switching circuits
- CSU
- PDAs
- SONET/SDH ADM
- SDH/SONET multiplexers
- DVD-R
- 65 V DACs
- Cell phones
- Cable Modem
