Products
Manufacturer
RFQ
NEWS
ContactDG412DY-T1-E3
175ns, 145ns SPST - NO 35Ohm Analog Switches DG412 250pA 16-SOIC (0.154, 3.90mm Width)
- Manufacturer: Vishay Siliconix
- NO: 880-DG412DY-T1-E3
- Package: 16-SOIC (0.154, 3.90mm Width)
- Datasheet:
- Stock: 890
- Description: 175ns, 145ns SPST - NO 35Ohm Analog Switches DG412 250pA 16-SOIC (0.154, 3.90mm Width)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 80Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Base Part Number | DG412 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 15V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 100pA |
| Power Dissipation | 600mW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 175 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 5V~44V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 35Ohm |
| Min Dual Supply Voltage | 7V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Crosstalk | -85dB @ 1MHz |
| Drain to Source Resistance | 45Ohm |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG412DY-T1-E3 Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. The electronic part delivers high-quality output through its 4 channels. The analog switch ics are built using SPST - NO switching circuits. The circuits in this analogue multiplexer number 4. Try searching with DG412 if you're looking for variants. There is 80Ohm internal resistance in this digital multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. 13V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. The voltage should be at least 7V if you are using dual power supplies. Operating voltages range from 15V. In order to operate the 4 inputs, there are several steps to follow. An environment with a temperature greater than 85°C should not be used to operate the digital switches. Resistivity from Drain to Source is 45Ohm for this electronic part. In this digital multiplexer, there are 4 outputs. It is offered by suppliers in package 16-SOIC.
DG412DY-T1-E3 Features
4 Channels
Switch Circuit: SPST - NO
1μA Supply Current
Drain-to-Source resistance: 45Ohm
DG412DY-T1-E3 Applications
There are a lot of Vishay Siliconix DG412DY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- Communications systems
- E1 Network Equipment
- DSUs
- Low-Voltage
- Data switching
- Sample hold systems
- Access Concentrators
- PCMCIA cards
- Central office
