Products
Manufacturer
RFQ
NEWS
ContactDG406DN
200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 500pA 28-LCC (J-Lead)
- Manufacturer: Vishay Siliconix
- NO: 880-DG406DN
- Package: 28-LCC (J-Lead)
- Datasheet:
- Stock: 9906
- Description: 200ns, 150ns 100Ohm QUAD Analog Switches BREAK-BEFORE-MAKE 28 Pins 500pA 28-LCC (J-Lead)(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 100Ohm |
| Signal Current-Max | 0.02A |
| Height | 3.69mm |
| Length | 12.57mm |
| Width | 12.57mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Resistance | 100Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Pin Count | 28 |
| Operating Supply Voltage | 15V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 7.5V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 450mW |
| Max Supply Current | 500μA |
| Propagation Delay | 350 ns |
| Turn On Delay Time | 600 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 12V ±5V~20V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 5V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 130pF |
| Switch Time (Ton, Toff) (Max) | 200ns, 150ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
DG406DN Overview
Presented in 28-LCC (J-Lead), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. In total, 28 terminations have occurred. The electronic part provides high-quality output because it has 16 channels. The electrical component body receives 28 pins. 1 circuits are used in this analogue multiplexer. Analog switches have 100Ohm internal resistance. For details about the functions of 28 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. A voltage higher than 44V should not normally be supplied to the switches. The digital multiplexer has a low cost Dual, Single supply. 7.5V is the lowest voltage the electrical component should receive. If put voltage greater than 500μA on the device, damage may be caused to the analogue multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 20V. It is recommended that you attach at least 5V to your dual power supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. This electrical part is compatible with 15V operating voltages. A 16 input needs to be operated. This electronic component presents a Drain to Source resistance of 100Ohm.
DG406DN Features
16 Channels
Drain-to-Source resistance: 100Ohm
DG406DN Applications
There are a lot of Vishay Siliconix DG406DN Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- SONET
- Signal routing between systems
- Battery Powered Instruments
- PDAs
- Multiplexers
- Automotive applications
- Audio and video routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Channelized and Unchannelized DS3 applications
