Products
Manufacturer
RFQ
NEWS
ContactDG305AAA
250ns, 150ns SPDT 50Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE 5nA 15V TO-100-10 Metal Can
- Manufacturer: Maxim Integrated
- NO: 503-DG305AAA
- Package: TO-100-10 Metal Can
- Datasheet:
- Stock: 6520
- Description: 250ns, 150ns SPDT 50Ohm BOTTOM Analog Switches BREAK-BEFORE-MAKE 5nA 15V TO-100-10 Metal Can(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TA |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Operating Supply Voltage | 15V |
| Number of Circuits | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 10V |
| Max Supply Current | 10μA |
| Turn On Delay Time | 250 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5nA |
| Channel Capacitance (CS(off), CD(off)) | 14pF 14pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 12pC |
| Crosstalk | -74dB @ 500kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±5V~18V |
| Height | 4.7mm |
| Length | 9.4mm |
| Width | 9.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG305AAA Overview
Presented in TO-100-10 Metal Can, this electrical component is convenient for overseas shipping. It is mounted in the position Through Hole. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. A total of 10 terminations have been recorded. If the voltage supply is 15V volts, the electrical component should be turned on and run. SPDT switching circuits are used in these analog switch ics. The circuits in this analogue multiplexer number 1. It has an internal resistance of 50Ohm. To find out what the 10 pins do, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In a normalsituation, users should not supply the switches with voltage higher than 36V. An effective Dual supply digital multiplexer. It is recommended that the electrical component receives a voltage of 10V. It may damage the digital multiplexer if the voltage is higher than 10μA. For this switch, a dual supply voltage is feasible, but it must not exceed 18VIf you are using dual power supplies, you should attach at least 5V. There is a voltage range of 15V operating voltages for the electrical part.
DG305AAA Features
Switch Circuit: SPDT
DG305AAA Applications
There are a lot of Maxim Integrated DG305AAA Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- E1 Multiplexer
- Automotive applications
- Microprocessor Controlled Analog Systems
- Low-Voltage
- Battery-powered systems
- Avionics
- Multiplexers
- Modems
- Fiber In The Loop (FITL)
