DC-SP-01-JT

DC-SP-01-JT Overview

Microcontroller MPU Core is a module or board.There are ARM7TDMI, NS7520 cores in its processor, which is what powers the microcontroller.The microcontroller is set to -40°C~85°C by default, which is the default setting.A MCU electronics's flash size is measured by the letter 4MB.There are two types of connectors. The first is RJ45.In the Digi Connect SP series, this is one of the microcontrollers.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 16MB.In 55MHz speed, the MCU chip operates.For as long as microprocessor continues to operate accurately at the 55MHz frequency, microprocessor will continue to function correctly.The package has the Module extension.At this time, 85°C is the maximum operational temperature.When operating, microprocessor should be warmer than -40°C.In the program, there is a structure called ARM.30V volts is the operating voltage for this microcontrollers.We have chosen FLASH, RAM as the data storage value.Set the supply current of the MCUs to 370mA.

DC-SP-01-JT Features

Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Speed of 55MHz
Core architecture of ARM

DC-SP-01-JT Applications

There are a lot of Digi DC-SP-01-JT Microcontroller, Microprocessor, FPGA Modules applications.

• Human Machine Control Panel
• Test and Measurement
• Industrial Control
• Bar Code Scanners
• Embedded Instrumentation
• Industrial Gateways
• Embedded Control Processing
• Thermostat
• Data Acquisition
• Medical Instrumentation