Products
Manufacturer
RFQ
NEWS
ContactDAC5662IPFBR
390mW μW73 dB dBDACCurrent - UnbufferedSurface Mount Current Source R1.5 B B1.2mm μm 7mm mm
- Manufacturer: Texas Instruments
- NO: 815-DAC5662IPFBR
- Package: 48-TQFP
- Datasheet:
- Stock: 9822
- Description: 390mW μW73 dB dBDACCurrent - UnbufferedSurface Mount Current Source R1.5 B B1.2mm μm 7mm mm(Kg)
- Delivery:
- Payment:
In Stock
Please send RFQ , we will respond immediately.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
You may place an order without registering to Chip Smart.
We strongly suggest you sign in before purchasing as you
can track your order in real time.
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
RFQ (Request for Quotations)It is recommended to request for quotations to get the latest
prices and inventories about the part.
Our sales will reply to
your request by email within 24 hours.
1. You'll receive an order information email in your inbox.
(Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some
extent, the sales manager is going to reconfirm the order and let you know if there
are any updates.
Shipping starts at $40, but some countries will exceed $40. For
example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time
zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Subcategory | Other Converters |
| Max Power Dissipation | 390mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DAC5662 |
| Pin Count | 48 |
| Output Type | Current - Unbuffered |
| Operating Supply Voltage | 3.3V |
| Polarity | Unipolar |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 75mA |
| Number of Bits | 12 |
| Architecture | Current Source |
| Converter Type | D/A CONVERTER |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Differential Output | Yes |
| Resolution | 1.5 B |
| Sampling Rate | 200 Msps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Settling Time | 20ns (Typ) |
| Power Consumption | 330mW |
| Integral Nonlinearity (INL) | 2 LSB |
| Input Bit Code | OFFSET BINARY |
| Number of Converters | 2 |
| Conversion Rate | 200 Msps |
| INL/DNL (LSB) | 0.3, 0.2 |
| Signal to Noise Ratio (SNR) | 73 dB |
| Differential Nonlinearity | 2 LSB |
| Analog Output Voltage-Min | -1V |
| Spurious-free dynamic range (SFDR) | 85 dB |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DAC5662IPFBR Overview
This package is included in the 48-TQFP package and is available for purchase. An electrical supply voltage of 3.3V powers it. An FPGA part from the Other Converters family. By attaching the Surface Mount connector, you can use this FPGA module with your development board. It is recommended that the operating temperature be kept within the range -40°C~85°C while the machine is operating. It is for space saving reasons that this FPGA model is contained in Tape & Reel (TR). As a whole, it has 48 terminations. DAC5662 is the base part number that can be used to identify related parts. 48 pins are designed into the device. A 3.3V-volt supply allows designers to fully utili3.3Ve its flexibility. Featuring 48 pins in total, it is a versatile device. In addition, it is able to support a maximum supply voltage of 3.6V. Using a supply voltage as low as 3V, it will work.
DAC5662IPFBR Features
48-TQFP package
48 pin count
48 pins
DAC5662IPFBR Applications
There are a lot of Texas Instruments DAC5662IPFBR Digital to Analog Converters (DAC)?applications.
- Synchro Applications
- Voltage Set Point Control
- Wideband communications:
- Wireless infrastructure:
- High-End Compact Disc Players
- Low Power Systems
- Synthesizers and Keyboards
- Instrumentation:
- Precision AGC Circuits
- Low Cost I/O
