CY7B9910-7SXC

CY7B9910-7SXC Overview

The Tube method is used for packaging clock ICs. This clock generator is embedded in the 24-SOIC (0.295, 7.50mm Width) package. It contains a total of 24 terminations within RF synthesizer. For this clock generator ic, a voltage of 5V is required. This Clock PLL will be fed by Clock as its input. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An up to 80MHz frequency is provided by this clock-based RF synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. The maximal supply voltage this clock generator would take is 5.5V. This frequency synthesizer requires a supply voltage above 4.5V to be safe. Clock PLL works with 4.5V~5.5V supply voltage provided. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. As the name suggests, this is a clock generator that is compatible with TTL logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. Microprocessor-specific clock PLL with 24 bits. At 0.75 ns Max, this clock generator offers low timing skew. This PLL belongs to the family of 7B.

CY7B9910-7SXC Features

Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V

CY7B9910-7SXC Applications

There are a lot of Rochester Electronics, LLC CY7B9910-7SXC Clock Generators applications.

• High-speed communication applications
• High-speed optical transport network (OTN)
• Electronic equipment
• Microwave radio
• Telecommunication systems
• Signal analyzer
• Navigation, positioning and surveillance system for aircraft, ships and ships
• Coherent carrier tracking
• Aerospace and defense
• Automatic control system test