CY28419OXCT

CY28419OXCT Overview

As a clock IC, it uses the Tape & Reel (TR) package. There is a clock generator embedded in the 56-BSSOP (0.295, 7.50mm Width) package. In it, there are 56 terminations to be found. Clock generator ics require a voltage of 3.3V. In this clock generator, Crystal is used as the input to the clock. To access the full performance of the electronic component, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 400MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. A frequency synthesizer which is compatible with the HCSL, LVCMOS logic levels is presented here. Clock PLL is equipped with 56 pin count. This part number is related to its related electronic parts. There is a 56 pin that is available on the frequency synthesizers. The supply voltage should be maintained at 3.3V for high efficiency. Clock PLL is facilitated with 24 signal outputs to magnify output frequency as high as possible. This is a 2-element clock generator with low jitter performance.

CY28419OXCT Features

Available in the 56-BSSOP (0.295, 7.50mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY28419OXCT Applications

There are a lot of Silicon Labs CY28419OXCT Clock Generators applications.

• Clock recovery
• Quenching?
• Televisions
• Instrument
• Skew suppression
• Reference signals to RF systems
• Deep space exploration
• Threshold extension
• Radar
• Ultrasound diagnosis