CY24130ZXC-2

CY24130ZXC-2 Overview

As a clock IC, PLLs is packaged using the Tube method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 16 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. This clock generator receives its inputs from CMOS, Crystal, which is designed to be the clock source. It is possible to access the full performance of the electrical part by implementing 1 circuits. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 148.5MHz. PLL clock is mounted in the way of Surface Mount. As long as you provide 3.135V~3.465V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. I would like to present to you a frequency synthesizer that is compatible with CMOS logic levels. This is an electronic part that can be classified as a Clock Generator, Fanout Distribution in this case. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The HOTlink II? series includes this electronic part.

CY24130ZXC-2 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V

CY24130ZXC-2 Applications

There are a lot of Rochester Electronics, LLC CY24130ZXC-2 Clock Generators applications.

• Medical equipment
• Cell phones
• Digital circuits
• Cellular/4G
• Simple clock clean-up circuits
• Wide area power system
• Signal demodulation
• Precision auxiliary angle deflection measurement
• Notebooks
• Frequency synthesis