CY2308SC-2

CY2308SC-2 Overview

It is packaged using the Tube method since it is a clock IC. This clock generator is embedded in the 16-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain a maximum temperature of NOT SPECIFIED during reflowing. As a result of this, we can find 16 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 133.3MHz Max can be achieved with this clock-based frequency synthesizer. Surface Mount-slots make it easy to mount this electronic component on panels. 3.6V would be the maximum supply voltage for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. By calculating the test statistics, 0°C~70°C is the appropriate ambient temperature. LVCMOS logic levels are supported by this RF synthesizer. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. In this IC, a 16-bit frequency generator is designed specifically for use in microprocessors. There is a low timing skew at 0.2 nsmax with this RF synthesizer. By searching for the 2308 family, it is possible to find similar electrical components.

CY2308SC-2 Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

CY2308SC-2 Applications

There are a lot of Rochester Electronics, LLC CY2308SC-2 Clock Generators applications.

• Line cards used in telephone exchange
• Automatic control system test
• Time to digital converters
• Local oscillators (LOs)
• Digital HDTV systems
• Phase modulation cellular systems
• GPS systems
• Signal demodulation
• Computers to manage memory cards
• Picocells, femtocells and small cells