CY2305CSXA-1

CY2305CSXA-1 Overview

The Tube method is used for packaging clock ICs. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 8 terminations can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 133.33MHz Max. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage (Vsup) reaches 3.6V. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. This clock PLL works with a supply voltage of 3V~3.6V. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. LVCMOS logic levels are supported by this RF synthesizer. It has been classified as a Fanout Buffer (Distribution), Zero Delay Buffer electronic part, which means that it is a semiconductor. The clock-generating IC is a 8-bit device designed specifically for microprocessors. At 0.2 ns Max, this analog clock generator exhibits low timing skew. A search for the 2305 family will yield similar electronic components.

CY2305CSXA-1 Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

CY2305CSXA-1 Applications

There are a lot of Rochester Electronics, LLC CY2305CSXA-1 Clock Generators applications.

• Signal frequency synthesis circuits
• VSAT (Small Ground Satellite Station)
• 1 Gigabit Ethernet
• Electronic equipment
• Signal generator
• Pagers
• Skew suppression
• Broadcast communication
• Cable television converter boxes
• Modems