CY2304SC-2

CY2304SC-2 Overview

A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. A Clock PLL is included with the 8-SOIC (0.154, 3.90mm Width) package. The peak reflow temperature (Cel) amounts to 220 to be essentially indestructible. There are a total of 8 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. There is a Clock PLL called Clock which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 133.3MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 3.6V. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. This is an electronic part that can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer in this case. Clock PLL is equipped with 8 pin count. Low timing skew is offered by this RF synthesizer at maximum 0.2 ns. The digital clock generator has 4 high-enable output pins. You can find similar clock generators by searching for the 2304 family.

CY2304SC-2 Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
4 true outputs

CY2304SC-2 Applications

There are a lot of Rochester Electronics, LLC CY2304SC-2 Clock Generators applications.

• Quenching?
• Mobile telephones
• MRI
• Satellite receivers
• Modems
• Cell phones
• Frequency synthesis
• FMCW Radar
• Local oscillator source in receiver
• Skew suppression