CDCVF855PW

CDCVF855PW Overview

The Tube method is used for packaging clock ICs. A Clock PLL is included with the 28-TSSOP (0.173, 4.40mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 28 terminations. For this clock generator ic, a voltage of 2.5V is required. A clock generator's input is called SSTL-2 and it is designed as the input for this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 2.7V of power. There should be a voltage supply above 2.3V for this frequency generator in order to ensure its safety. Clock generators should operate with the voltage supply of 2.3V~2.7V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. PLL Clock Driver is the type of electrical part that this component is classified as. It is a 28-bit IC that is designed for microprocessors specifically. You can find related electrical components to the base part number CDCVF855. A 28 pin is available on the PLL. Electronic frequency generator can handle voltages up to 2.5V. And basically, this clock generator is often classified as a kind of Clock Drivers. 4 signal outputs enable clock PLL to magnify output frequency as high as possible. This PLL belongs to the family of 855. When operated at 220MHz, frequency synthesizer achieves high efficiency.

CDCVF855PW Features

Available in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCVF855PW Applications

There are a lot of Texas Instruments CDCVF855PW Clock Generators applications.

• Closed circuit systems
• Pagers
• Wide area power system
• Reference signals to RF systems
• Digital circuits
• Electronic equipment
• Frequency shifting decodes
• Test and instrumentation equipment
• Televisions
• Signal analyzer