CDCVF2509PW

CDCVF2509PW Overview

Tube-method packaging is used for clock ICs. This clock generator is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. In it, there are 24 terminations to be found. To operate this time clock generator, 3.3V voltage should be applied. In this case, LVTTL is designed to be the input of the clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. Surface Mount-slots make it easy to mount this electronic component on panels. The maximum voltage this clock PLL can handle is 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. There should be 3V~3.6V provided with this RF synthesizer. Based on test statistics, ambient temperature should be set at 0°C~85°C. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. In this IC, a 24-bit frequency generator is designed specifically for use in microprocessors. You can find related electrical components to the base part number CDCVF2509. There is a 24 pin that is available on the frequency synthesizers. Supply voltage 3.3V is what clock generator can handle. The clock PLL is generally classified as a Clock Drivers device. Clock PLL has 9 signal outputs to maximi9e output frequency. By operating at a frequency of 175MHz, frequency generator is able to achieve high efficiency. Analog clock generator is capable of delivering a load capacitance of 25pF.

CDCVF2509PW Features

Available in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF

CDCVF2509PW Applications

There are a lot of Texas Instruments CDCVF2509PW Clock Generators applications.

• Camera systems
• Pulsed digital systems
• Digital circuits
• Bluetooth receivers
• Local oscillator source in receiver
• Simple clock clean-up circuits
• Antenna automatic tracking
• Cell phones
• Various decoding circuits
• Jitter reduction