CDCVF25081PWG4

CDCVF25081PWG4 Overview

This clock IC is packaged using the Tube method. In the 16-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. As you can see, it consists of 16 terminations. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be LVTTL. 1 circuits are implemented to access the electronic component's full performance. This component can be conveniently installed on the panel thanks to the Surface Mount. 3.6V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. There are 3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. This is an electronic part that can be classified as a PLL Clock Driver in this case. Microprocessor-specific clock PLL with 16 bits. These related electrical parts are available for the base part number CDCVF25081. There is a 16 pin that is available on the digital clock generator. Supply voltage 3.3V is what time clock generator can handle. A Clock Drivers clock generator is essentially what this device is. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 200MHz, frequency generator is capable of achieving high efficiency. The load capacitance is 25pF.

CDCVF25081PWG4 Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF

CDCVF25081PWG4 Applications

There are a lot of Texas Instruments CDCVF25081PWG4 Clock Generators applications.

• Small signal recovery
• Computers to manage memory cards
• 10 Gigabit Ethernet
• Fiber Channel
• Electronic countermeasures
• Electronic equipment
• Ultrasound diagnosis
• Main oscillator in receiver
• Symbol synchronization
• Digital switching systems