CDCVF111FNG4

CDCVF111FNG4 Overview

There is a case available for the cut smart buffer in 28-LCC (J-Lead). Tube is the form in which it is packaged. It is normal to operate with a value of 650MHz. There are 28 terminations in it. With a supply voltage of 3.3V, high efficiency is possible. In this case, it is set up as Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution). Setting the temperature to -40°C~85°C will ensure reliable performance. The clock switch should operate with a voltage of 3V~3.6VV. Its recommended mounting way is Surface Mount. There are 28 pins on the clock buffer. The 28 pins are used for operation. Basically, it belongs to the same family as the CDCVF111. The circuit clock is contained in Clock Drivers. It belongs to the family of electronic gadgets known as 111. The maximum supply voltage (Vsup) has been set to 3.6V. The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. The default setting of this field is to output 9. Maintaining a 3.3V supply voltage ensures maximum efficiency. A quiescent current of 100mA is consumed, and its external influences are unaffected.

CDCVF111FNG4 Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

CDCVF111FNG4 Applications

There are a lot of Texas Instruments CDCVF111FNG4 Clock Buffers & Drivers applications.

• DDR4 JEDEC standard LRDIMM design
• Edge computing
• Telecommunications
• Handheld test instruments
• Clock signal level shifting
• Big data
• Other clock/data distribution
• Measurement test
• Synchronous digital system
• 5G