CDCV855IPW

CDCV855IPW Overview

As a clock IC, it uses the Tube package. In the 28-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains 28 terminations that can be found in frequency synthesizer. Clock generator ics require a voltage of 2.5V. SSTL-2 is designed as this clock generator's input. It is possible to access the full performance of the electrical part by implementing 1 circuits. This clock-based frequency generator provides a frequency up to 180MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 2.7V as a supply voltage. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.3V. As long as there are 2.3V~2.7V supply voltages provided, clock generator ic should work. The temperature should be set at -40°C~85°C to ensure reliable performance. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. Microprocessor-specific clock PLL with 28 bits. These related electrical parts are available for the base part number CDCV855. As such, it is often referred to as a kind of Clock Drivers clock PLL. At maximum 0.05 ns, this analog clock generator has low timing skew. There are 4 pins that are configured to enable high true output on this analog clock generator. This clock generator belongs to the family of 855.

CDCV855IPW Features

Available in the 28-TSSOP (0.173, 4.40mm Width)
Supply voltage of 2.5V
4 true outputs

CDCV855IPW Applications

There are a lot of Texas Instruments CDCV855IPW Clock Generators applications.

• Electronic equipment
• Simple clock clean-up circuits
• Laptops
• Digital logic circuits
• Camera systems
• Satellite navigation communication
• Televisions
• CPUs
• Cell phones
• Signal frequency synthesis circuits