CDCS502PWR

CDCS502PWR Overview

It is packaged using the Tape & Reel (TR) method since it is a clock IC. In the 8-TSSOP (0.173, 4.40mm Width) package, there is an embedded clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. There are 8 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. This Clock PLL will be fed by Crystal as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 108MHz maximum. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL works with 3V~3.6V supply voltage provided. The temperature should be set at -40°C~85°C to ensure reliable performance. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. This electronic component can be classified as a Spread Spectrum Clock Driver. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electronic parts of part number CDCS502 are listed below. There is a 8 pin that is available on the frequency synthesizers. This time clock generator can handle a voltage of 3.3V as its supply voltage. A supply current of 22mA needs to be provided to fully play RF synthesizer's function. This clock generator combines clock logic function Clock on input data.

CDCS502PWR Features

Available in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCS502PWR Applications

There are a lot of Texas Instruments CDCS502PWR Clock Generators applications.

• Main oscillator in receiver
• Automatic control
• Radar
• Digital HDTV systems
• Precision auxiliary angle deflection measurement
• Laptops
• PCI express cards
• 1 Gigabit Ethernet
• Local oscillators (LOs)
• Jitter reduction