CDCLVP110VFR

CDCLVP110VFR Overview

32-LQFP case is available for the cut smart buffer. It is packaged as a Tape & Reel (TR). There are 32 terminations in it. Supply voltages of 2.5V allow for high efficiency. The circuit clock is mounted on Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. Set the temperature to -40°C~85°C for reliable performance. This circuit clock should be able to operate on a power supply of 2.375V~3.8V volts. In this case, it is placed in the way of Surface Mount. There is a pin count of 32 on timeing clock. There is LVPECL output from clock driver. Operation is performed using the 32 pins. This is a member of the CDCLVP110 family. The cut smart buffer you are looking for is contained within Clock Drivers. This electronic gadget is a member of the 110 family. Vsup is set to 3.8V as the maximum supply voltage. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.375V. As a default, it is set to output 10. A supply of -2.5/-3.3/2.5/3.3V volts is needed to power it. By utilizing this gadget, one can also obtain LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY. It is capable of maintaining excellent accuracy with a frequency of 3.5GHz. This method employs the packing method of TR.

CDCLVP110VFR Features

32 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 3.5GHz frequency

CDCLVP110VFR Applications

There are a lot of Texas Instruments CDCLVP110VFR Clock Buffers & Drivers applications.

• Global positioning system (GPS)
• Gigabit Ethernet (GbE)
• Backplane
• Radar
• Medical instruments
• Switch
• Host bus adapter card
• High speed line receiver
• Fibre channel (FC)
• Storage area network