CDCLVP110VF

CDCLVP110VF Overview

There is a case available for the cut smart buffer in 32-LQFP. There is a Tray package attached to it. There are 32 terminations in it. With a voltage of 2.5V, high efficiency is possible. As a result, it will be mounted by Surface Mount in this case. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. It is recommended to set the temperature to -40°C~85°C so the system can perform reliably. It should be capable of operating with a power supply of 2.375V~3.8V volts. In this case, it is placed in the way of Surface Mount. There is a pin count of 32 on timeing clock. There is an output of LVPECL. The 32 pins are used for operation. It is a member of the CDCLVP110 family. The clock divider is located in Clock Drivers. It is part of the 110 family of electronic buffer ICs. There is 3.8V maximum supply voltage (Vsup). It is important to keep the supply voltage (Vsup) above 2.375V in order to ensure normal operation. By default, the output of the circuit clock is set to 10. A power supply of -2.5/-3.3/2.5/3.3V volts powers it. By utilizing this gadget, one can also obtain LVECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V; ALSO OPERATES AT 3.3 V SUPPLY. As long as the frequency of the clock switch is set to 3.5GHz, excellent accuracy can be achieved.

CDCLVP110VF Features

32 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 3.5GHz frequency

CDCLVP110VF Applications

There are a lot of Texas Instruments CDCLVP110VF Clock Buffers & Drivers applications.

• Other clock/data distribution
• High-performance server
• Defense and aerospace equipment
• Tower server
• Hardware accelerator
• Measurement test
• Threshold detection
• Dual core processor workstations and servers
• DDR4 JEDEC standard LRDIMM design
• Gigabit Ethernet (GbE)